by Necessary guide to readying your home for painting today
After finishing your home construction or remodelling, the quality of your finishing can be accentuated by the type of painting you choose. Painting is clearly an expensive project that will need outsourcing the best experts your budget can afford. You should pay attention to the residential painters Winnipeg selection process to eliminate possibility of getting jokers on-board for your project. This does not however mean that you cannot do the job DIY when you know how to do it. You require the right budget to cater for all expenses and better yet find the right tools and safety gear to use for the task. To achieve success in any project, check out the details that matter from the discussions below.
Test for lead and remove
If your house was made more than 20 years ago, chances are lead type of painting was used for its finishing considering the hazardous side effects of lead to human life in case of exposure. Get testing experts for a budget first in order to safely remove lead from your home painting especially if it was made before 1978 in most countries. Once the safe removal of the same has been done, one can continue to lay down the home repainting procedure. This is always necessary in compliance with the laid down restrictions of the country you will be coming from.
Scrap off old paint and wash
Ignorance is easily the reason you may end up having poor quality painting work on for your house. After lead removal, it comes down to how clean your exterior wall is before you commence the repainting procedure. Phosphate free cleanser mixed with water can help you rid the wall of any remaining old paint for a clean surface for painting. By doing this, you mitigate the chances of mildew thriving on your wall’s new paint. You ultimately boost your chances of smooth painting and using reasonably less paint for the procedure.
Start sanding rough areas
Search the market for sanders that are fitted with HEPA filters especially when you are trying to avoid lead related problems via compliance. 80-grit sandpaper is most preferably what you need to be looking for to get the job done. You must however mind the force used in the sanding not to cause any adverse damages on the surface you are supposed to paint but is only then that the right repairs can be done on the wall for an even surface for painting.
Fill and make necessary repairs
This is the point where secondary assessment is done for the wall and any other extra problems are determined at the time for the right corrections to be made. This is especially crucial if you have used wood for your exterior wall. Fill any holes or spaces on the wall first before you commence the painting just to make sure it looks smooth once it is down. There are then repairs that will be done to prevent poor drainage which will increase the rot of your painting and wall in general. You can always use professional experts for the wall repair just to make sure the work is handled diligently.
Add primer and all joints should be caulked
The market has different primer options you should use for the top covering of your wall when considering repainting. It is ideal to do the same before you commence applying caulked to it for the aesthetic appeal purposes. It is however more than just for aesthetic appeal when caulked has been applied; it helps in preventing air leaks and sealing tight joints to mitigate water penetration to the wall interior.
Purchase the right paint
You have the option of using oil-based paints and water-based acrylics. Determine early enough the type of paint that you should use for your painting and most preferably use the water based acrylics which are most recommended by most professional painters. It is besides instrumental to consider choosing the finishing for the exterior painting. Many homeowners settle for sheen which helps in mitigating the effects of sun on your paint.
Start applying the top coat
When adding the top coat onto the exterior painting, mind how much is applied. You do not want the paint to be flaking from the wall paint as a result of adding a thick layer of top coat finishing. It may ultimately end up adding more layers on the original paint which results into a lot of peeling due to the changing weather patterns. A thin layer of top coat is what you need to apply for it to blend perfectly with the initial painting done on the wall. Professionals understand every detail about this and will recommend the best painting and cost effective option to use for your top coating demands.
Maintain the painting
You should know that the quality of the painting of your house exterior is subject to deterioration mostly due to poor weather and zero maintenance done on it. Make sure to inspect the caulked yearly and make the necessary replacements. Supposing birds have nested on your roof, remove and clean the stains they cause on your wall. The same case goes for those whose walls have been affected by pollen. Ignorance to such details might just be one of the factors accelerating the deterioration of your painting quality.
Conclusion
How long your wall’s exterior painting will last only depends on the quality of work done on it. DIY painting might be fun and cost effective however the cost of redoing it can be costly for those that get it wrong on the first time. You will be better off outsourcing expert painters to man the job but first ascertain their experience, cost of services and the reputation that precedes them in the market. You not only improve the quality of work by getting experts to do it but also proper resource distribution and achieving all that within the set time frame you had designated for the project.
